Part No. : SFR10-32NF2A5-16 | Alternate P/N : SFR1032NF2A516 | Manufacturer : a p m hexseal corporation |
Item Name: screw machine | NSN: 5305-00-137-3271 (5305001373271) | CAGE Code: 97539 |
FSC: 5305 Screws |
If you require part number SFR10-32NF2A5-16 from A P M Hexseal Corporation which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number SFR10-32NF2A5-16 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305001373271 and was produced under the CAGE Code 97539. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part SFR10-32NF2A5-16 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. SFR10-32NF2A5-16
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 2A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.136 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.348 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CYAU | SCREW MATERIAL | STEEL CORROSION RESISTING |
CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE OR 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD SINGLE MATERIAL RESPONSE |
FEAT | SPECIAL FEATURES | FURNISH ONE SILICONE RUBBER O RING,BEARING SURFACE OF HEAD UNDERCUT FOR O RING |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload