Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 343544 | Manufacturer : aero engineering and manufacturing | Item Name: nut plain round |
| NSN: 5310-00-637-0771 (5310006370771) | CAGE Code: 17772 | FSC: 5310 Nuts and Washers |
If you require part number 343544 from Aero Engineering And Manufacturing which is described as a Nut Plain Round component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 343544 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310006370771 and was produced under the CAGE Code 17772. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 343544 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-637-0771 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 006370771 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 343544 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 2.052 INCHES MINIMUM AND 2.072 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 2 |
| AGGP | DRILLED HOLE DIAMETER | 0.062 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| BZRR | THREAD SERIES | UN |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | 1.625 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION J |
| CRSQ | COUNTERSINK ANGLE | 108.0 DEGREES MINIMUM NUT AND 112.0 DEGREES MAXIMUM NUT |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions