Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3548 | Manufacturer : allied automotive | Item Name: cylinder assembly hydraulic brak |
| NSN: 2530-00-295-7372 (2530002957372) | CAGE Code: 14894 | FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components |
If you require part number 3548 from Allied Automotive which is described as a Cylinder Assembly Hydraulic Brak component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3548 which is listed under the Federal Supply Class 2530 Vehicular Brake Steering Axle Wheel and Track Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530002957372 and was produced under the CAGE Code 14894. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3548 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-295-7372 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 002957372 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3548 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | IRON,CAST |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 1.780 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.570 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.187 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 1.590 INCHES NOMINAL |
| AJFY | SEAT ANGLE IN DEG | 42.0 |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2B |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| ASBP | BORE TYPE | STRAIGHT |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BBJX | MOUNTING POSITION | RIGHT |
| CBBL | FEATURES PROVIDED | BLEEDER VALVES AND RUBBER BOOT |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.313 INCHES NOMINAL |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| CLML | MOUNTING TYPE AND LOCATION | FLANGE CENTER SECTION |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.562 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 1.625 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CENTER SECTION |
| CLMT | PORT STYLE | INVERTED FLARE |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| CLMX | PORT THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 |
| CLNB | PORT THREAD CLASS | 2B |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions