Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MIL-DTL-10215K | Alternate P/N : MILDTL10215K | Manufacturer : am general llc |
| Item Name: shaft assembly flex | NSN: 6680-00-832-7566 (6680008327566) | CAGE Code: 34623 |
If you require part number MIL-DTL-10215K from Am General Llc which is described as a Shaft Assembly Flex component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MIL-DTL-10215K which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6680008327566 and was produced under the CAGE Code 34623. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MIL-DTL-10215K today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| SR-1 | SPEC/STD CONTROLLING DATA | |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON FIRST END HEXAGON SECOND END |
| AJXJ | CORE MATERIAL | STEEL |
| BDRL | SETSCREW | NOT INCLUDED FIRST END NOT INCLUDED SECOND END |
| SR-1 | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M10215-1F1 |
| AKMF | CORE SURFACE TREATMENT | ZINC COATED |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| CFRT | SWIVEL END | NOT PROVIDED FIRST END NOT PROVIDED SECOND END |
| CFRY | LUBRICATION FITTING | NOT PROVIDED FIRST END NOT PROVIDED SECOND END |
| AASA | THREAD LENGTH | 0.327 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| CFRR | CASING PROTECTIVE DEVICE TYPE | RUBBER COVER |
| SR-1 | MANUFACTURERS CODE | 81349 |
| CFRQ | CASING OUTSIDE DIAMETER | 0.688 INCHES NOMINAL |
| AEDN | TIP LENGTH | 0.734 INCHES MINIMUM AND 0.922 INCHES MAXIMUM FIRST END 0.375 INCHES NOMINAL SECOND END |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-10215K |
| CFRW | END OVERALL DIAMETER | 1.813 INCHES NOMINAL FIRST END 0.875 INCHES NOMINAL SECOND END |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION,TORSION STRENGTH WINDING DIRECTION 15.0 POUNDS |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END 0.750 INCHES NOMINAL SECOND END |
| ABHP | OVERALL LENGTH | 58.578 INCHES MINIMUM AND 58.891 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL FIRST END THREADED INTERNAL SECOND END |
| BJPS | CASING MATERIAL | STEEL |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END 0.101 INCHES MINIMUM DIAMETER AND 0.104 INCHES MAXIMUM DIAMETER SECOND END |
| CFRM | TORSIONAL DEFLECTION RATING | NOT RATED |
| CFRN | CASING SURFACE TREATMENT | CADMIUM-PLATED FINISH |
| CFRP | CASING LENGTH BETWEEN FERRULES | 57.437 INCHES MINIMUM AND 57.563 INCHES MAXIMUM |
| CFRZ | CORE OVERALL LENGTH | 58.547 INCHES MINIMUM AND 58.859 INCHES MAXIMUM |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| AAJD | THREAD CLASS | 2B FIRST END 2B SECOND END |
| APJC | THREAD LOCATION | INTERNAL FIRST END INTERNAL SECOND END |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions