Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 64A0000-005 | Alternate P/N : 64A0000005 | Manufacturer : bae systems inc |
| Item Name: resistor variable wire wound non | NSN: 5905-00-882-6380 (5905008826380) | CAGE Code: 94117 |
| FSC: 5905 Resistors |
If you require part number 64A0000-005 from Bae Systems Inc which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 64A0000-005 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905008826380 and was produced under the CAGE Code 94117. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 64A0000-005 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-882-6380 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 008826380 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| RP548-05-202 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.283 INCHES MINIMUM AND 1.343 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AAPN | SECTION QUANTITY | 1 |
| ABJT | TERMINAL LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES MINIMUM AND 0.091 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.048 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | SELF-LOCKING SHAFT |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions