BJE16G by Beemer Precision Inc With NSN 3130-00-118-3146

Part No. : BJE16G	Manufacturer : beemer precision inc	Item Name: bearing unit plain
NSN: 3130-00-118-3146 (3130001183146)	CAGE Code: 70901	FSC: 3130 Bearings Mounted

If you require part number BJE16G from Beemer Precision Inc which is described as a Bearing Unit Plain component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number BJE16G which is listed under the Federal Supply Class 3130 Bearings Mounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130001183146 and was produced under the CAGE Code 70901. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part BJE16G today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for BJE16G

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number BJE16G with NSN 3130-00-118-3146, 3130-00-118-3146

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3130-00-118-3146 Item PartTypeName: BEARING UNIT,PLAIN	3130	001183146	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
BJE16G	2	2	5

Characteristics Data of NSN 3130-00-118-3146, 3130001183146

MRC	Criteria	Characteristic
ABTD	MOUNTING SLOT WIDTH	0.3281 INCHES NOMINAL
ABVG	MOUNTING SLOT LENGTH	0.6562 INCHES NOMINAL
ABXV	BORE DIAMETER	1.0000 INCHES NOMINAL
ACYB	BASE THICKNESS	0.2188 INCHES NOMINAL
ADFX	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	3.3281 INCHES NOMINAL
AFWC	HOUSING HEIGHT	1.8125 INCHES NOMINAL
AFWD	HOUSING LENGTH	1.1250 INCHES NOMINAL
AFWE	HOUSING WIDTH	4.0312 INCHES NOMINAL
AGKL	LUBRICATION FITTING TYPE	HYDRAULIC
AGNF	BASE LENGTH	1.1250 INCHES NOMINAL
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
ANJS	SHAFT END TYPE	OPEN
ANKK	LOAD CAPABILITY TYPE	RADIAL
ANKP	HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE	0.9375 INCHES NOMINAL
CWGR	LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE	90.0 DEGREES NOMINAL
CWJW	MOUNTING HOLE TYPE	SLOTTED
LBMA	LUBRICATION MATERIAL	GREASE
MATT	MATERIAL	COPPER ALLOY 841 BEARING SURFACE
MATT	MATERIAL	STEEL HOUSING
MATT	MATERIAL	STEEL INNER LINER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING SURFACE
STYL	STYLE DESIGNATOR	PILLOW BLOCK,SEPARABLE WITH INNERLINER