Part No. : 120-269E3P8J | Alternate P/N : 120269E3P8J | Manufacturer : bell helicopter textron inc |
Item Name: screw close tolerance | NSN: 5305-01-530-2414 (5305015302414) | CAGE Code: 97499 |
FSC: 5305 Screws |
If you require part number 120-269E3P8J from Bell Helicopter Textron Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 120-269E3P8J which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015302414 and was produced under the CAGE Code 97499. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 120-269E3P8J today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 120-269E3P8J
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-530-2414 Item Description: Screw Close Tolerance | 5305 | 015302414 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
120-269e3p8j | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CQBC | Minimum Tensile Strength | 3180 POUNDS PER SQUARE INCH |
ABQJ | Point Style | FLAT |
AASK | Head Style | FLAT COUNTERSUNK |
MRC | Decoded Requirement | Clear Text Reply |
ABQZ | Internal Drive Style | TORX |
AHYM | Nominal Thread Diameter | 0.190 INCHES |
SFTT | Surface Treatment | CADMIUM OVERALL OR PASSIVATE OVERALL |
CMLP | Thread Quantity Per Inch | 32 |
MATT | Material | STEEL CORROSION RESISTING OVERALL |
THSD | Thread Series Designator | UNJF |
AASA | Thread Length | 0.338 INCHES NOMINAL |
AASB | Fastener Length | 0.838 INCHES NOMINAL |
AAUR | Grip Diameter | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
AASL | Head Diameter | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
ANEE | Grip Length | 0.500 INCHES NOMINAL |
AAJF | Thread Direction | RIGHT-HAND |
AAUJ | Spline Major Diameter | 0.155 INCHES NOMINAL |
CXCY | Part Name Assigned By Controlling Agency | SCREW, CLOSE TOLERANCE. |
FEAT | Special Features | END SHALL BE FLAT AND CHAMFERED PLUS INCOMPLETE THREAD NOT TO EXCEED TWO PITCHES. |
AAUM | Locking Feature | PATCH LOCKING FEATURE |
MDCL | Material Document And Classification | A286 CONFORMING TO THE CHEMISTRY OF AMS5731, AMS5732, AMS5737, OR AMS5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
AAVA | Point Diameter | 0.189 INCHES MINIMUM |
AAJD | Thread Class | 3A |
STDC | Surface Treatment Document And Classification | AMS-QQ-P-35 OR CADIUM PLATE PER AMS-QQ-P-416, TYPE II, CLASS 3. ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload