Part No. : 3MA123-3-6 | Alternate P/N : 3MA12336 | Manufacturer : boeing company the |
Item Name: screw close tolerance | NSN: 5305-00-151-6211 (5305001516211) | CAGE Code: 76301 |
If you require part number 3MA123-3-6 from Boeing Company The which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3MA123-3-6 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305001516211 and was produced under the CAGE Code 76301. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3MA123-3-6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-151-6211 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 001516211 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
3MFR123-3-6P | 6 | 2 | 7 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.380 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.377 INCHES MINIMUM AND 0.381 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 248.0 BRINELL STANDARD MINIMUM OVERALL AND 341.0 BRINELL STANDARD MAXIMUM OVERALL |
CQHQ | MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
MATT | MATERIAL | IRON ALLOY 660 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload