Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 8064P | Manufacturer : clausing industrial inc | Item Name: lathe engine |
| NSN: 3416-01-449-9193 (3416014499193) | CAGE Code: 64501 | FSC: 3416 Lathes |
If you require part number 8064P from Clausing Industrial Inc which is described as a Lathe Engine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 8064P which is listed under the Federal Supply Class 3416 Lathes. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3416014499193 and was produced under the CAGE Code 64501. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 8064P today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | HEAVY DUTY |
| FAAZ | Phase | THREE |
| AKSL | Purpose For Which Designed | GENERAL OR TOOLROOM |
| ACDC | Current Type | AC |
| ELEC | Voltage In Volts | 208.0 AND 230.0 AND 460.0 |
| FREQ | Frequency In Hertz | 60 |
| AWLX | Electric Motor Quantity | 4 |
| BTWC | Rated Swing Through Open Gap | 28.700 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 3.000 INCHES NOMINAL |
| BTZR | Thread Quantity Range | +2.0/+84.0 PER INCH |
| FEAT | Special Features | GENERICALLY GROUPED WITH 3416-01-237-6063 AND 3416NCC617558 |
| AWHA | Bed Type | REMOVABLE BLOCK GAP |
| AAXX | Mounting Type | FLOOR |
| ADQR | Center To Center Distance | 60.000 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| APGF | Design Type | SCREW |
| BTSZ | Spindle Speed Quantity | 16 |
| BTWB | Thread Change Quantity | 73 |
| BTWD | Actual Swing Through Open Gap | 28.700 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 5 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYW | Gear Change Type | QUICK |
| BTTB | Spindle Speed Range In Rpm | 0.0125 |
| BTTG | Swing Over Cross Slide | 10.600 INCHES NOMINAL |
| BTWF | Rated Swing Over Closed Gap | 18.100 INCHES NOMINAL |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| ASHK | Electric Motor Horsepower Rating | 10 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions