Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : DED502-1-102 | Alternate P/N : DED5021102 | Manufacturer : dassault aviation |
| Item Name: resistor variable wire wound non | NSN: 5905-00-723-9271 (5905007239271) | CAGE Code: F6117 |
| FSC: 5905 Resistors |
If you require part number DED502-1-102 from Dassault Aviation which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number DED502-1-102 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905007239271 and was produced under the CAGE Code F6117. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part DED502-1-102 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-723-9271 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 007239271 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 50-2-1-102 | B | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6480.0 MINIMUM AND 10080.0 MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | TERMINAL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | 0.026 CUBIC INCHES |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| ADAU | BODY HEIGHT | 0.397 INCHES MINIMUM AND 0.413 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6480.0 MINIMUM AND 10080.0 MAXIMUM |
| FEAT | SPECIAL FEATURES | SEALED TO PERMIT CLEANING IN COMMON SOLVENTS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions