Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : TY6607 | Manufacturer : deere and company | Item Name: generator engine accessory |
| NSN: 2920-01-118-9374 (2920011189374) | CAGE Code: 75755 |
If you require part number TY6607 from Deere And Company which is described as a Generator Engine Accessory component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number TY6607 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920011189374 and was produced under the CAGE Code 75755. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part TY6607 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-01-118-9374 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 011189374 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SE501354 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABFF | FURNISHED ITEMS | FAN PULLEY |
| ABPT | SECOND STEP DIAMETER | 0.625 INCHES NOMINAL |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADER | MOUNTING STYLE | FLANGE MTD W/TWO MTG HOLES,TOP HOLE THREADED |
| ADZC | ENVIRONMENTAL PROTECTION | DUSTPROOF |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 3500 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 22.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1100 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.430 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.320 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.380 INCHES NOMINAL |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 10000 |
| BZRR | THREAD SERIES | UNC |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions