Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : D3080 | Manufacturer : delafield corporation | Item Name: hose assembly nonmetallic |
| NSN: 4720-01-474-0518 (4720014740518) | CAGE Code: 5Z701 |
If you require part number D3080 from Delafield Corporation which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number D3080 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720014740518 and was produced under the CAGE Code 5Z701. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part D3080 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-474-0518 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014740518 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4055581 | 2 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 2B 2ND END |
| CQRB | Seat Angle | 12.0 DEGREES 1ST END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; PN D3080 STAINLESS MATERIAL IS 316L; SPECIFICATION ALLOWS EITHER 316L OR 321 STAINLESS STEEL |
| CQRB | Seat Angle | 37.0 DEGREES 2ND END |
| CRWL | Inside Surface Condition | SMOOTH |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| CQGM | Maximum Operating Pressure | 100.0 POUNDS PER SQUARE INCH |
| CRDW | Hydrostatic Test Pressure | 200.0 POUNDS PER SQUARE INCH |
| AAJD | Thread Class | 2B 1ST END |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| THSD | Thread Series Designator | UNJF 2ND END |
| AKUU | End Connection Design | STRAIGHT 2ND END |
| CRXX | Measuring Method And Length | 25.460 INCHES NOMINAL WORKING |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| AKXM | Fitting Component And Surface Treatment | COMPLETE FITTING PASSIVATE 1ST END |
| THSD | Thread Series Designator | UNJF 1ST END |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| ABKV | Outside Diameter | 0.875 INCHES MINIMUM AND 0.938 INCHES MAXIMUM |
| MEDA | Media For Which Designed | WATER AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MRC | Decoded Requirement | Clear Text Reply |
| AARX | Inside Diameter | 0.500 INCHES NOMINAL |
| ACKH | Minimum Inside Bending Radius | 3.500 INCHES |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
| CQJX | Nominal Thread Size | 0.750 INCHES 2ND END |
| CQJX | Nominal Thread Size | 0.750 INCHES 1ST END |
| AHNC | Connection Style | SWIVEL NUT, FLARELESS 2ND END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CQCS | Layer Composition And Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions