Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 400518 | Manufacturer : dh instruments inc | Item Name: nipple tube |
| NSN: 4730-01-499-3304 (4730014993304) | CAGE Code: 2J641 |
If you require part number 400518 from Dh Instruments Inc which is described as a Nipple Tube component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 400518 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4730014993304 and was produced under the CAGE Code 2J641. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 400518 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-01-499-3304 Item PartTypeName: NIPPLE,TUBE | 4730 | 014993304 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| U01692 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | PMEL CALIBRATION EQUIPMENT" |
| AHNC | CONNECTION STYLE | COMPRESSION (TUBE) 2ND END" |
| AHNC | CONNECTION STYLE | FLARED (TUBE) 1ST END" |
| AHSJ | LEG LENGTH | 0.315 INCHES NOMINAL 2ND END" |
| AHSJ | LEG LENGTH | 1.102 INCHES NOMINAL 1ST END" |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS" |
| CMLP | THREAD QUANTITY PER INCH | 28 1ST END" |
| CQGM | MAXIMUM OPERATING PRESSURE | 7252.0 POUNDS PER SQUARE INCH SINGLE RESPONSE" |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END" |
| CWCN | NOMINAL WIDTH ACROSS FLATS | 0.437 INCHES 2ND END" |
| CWFR | NOMINAL OVERALL LENGTH | 1.614 INCHES" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ADAPTOR, DH200 M X 2T; GLAND AND COLLAR FITTING" |
| FEAT | SPECIAL FEATURES | FIRST END IS HIGH PRESSURE CONE WITH LEFT HAND THREADS; SECOND END SWAGELOK 2T TYPE; ID 0.094 IN; WRENCHING FACILITY IS OFFSET 1.202 IN. FROM FIRST END." |
| MATT | MATERIAL | STEEL COMP 316 OVERALL" |
| STYL | STYLE DESIGNATOR | FLARED AND FLARELESS W/ CENTER WRENCHING FACILITY" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| AGAV | END ITEM IDENTIFICATION | PMEL CALIBRATION EQUIPMENT" |
| AHNC | CONNECTION STYLE | COMPRESSION (TUBE) 2ND END" |
| AHNC | CONNECTION STYLE | FLARED (TUBE) 1ST END" |
| AHSJ | LEG LENGTH | 0.315 INCHES NOMINAL 2ND END" |
| AHSJ | LEG LENGTH | 1.102 INCHES NOMINAL 1ST END" |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS" |
| CMLP | THREAD QUANTITY PER INCH | 28 1ST END" |
| CQGM | MAXIMUM OPERATING PRESSURE | 7252.0 POUNDS PER SQUARE INCH SINGLE RESPONSE" |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END" |
| CWCN | NOMINAL WIDTH ACROSS FLATS | 0.437 INCHES 2ND END" |
| CWFR | NOMINAL OVERALL LENGTH | 1.614 INCHES" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ADAPTOR, DH200 M X 2T; GLAND AND COLLAR FITTING" |
| FEAT | SPECIAL FEATURES | FIRST END IS HIGH PRESSURE CONE WITH LEFT HAND THREADS; SECOND END SWAGELOK 2T TYPE; ID 0.094 IN; WRENCHING FACILITY IS OFFSET 1.202 IN. FROM FIRST END." |
| MATT | MATERIAL | STEEL COMP 316 OVERALL" |
| STYL | STYLE DESIGNATOR | FLARED AND FLARELESS W/ CENTER WRENCHING FACILITY" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions