Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 601003 | Manufacturer : eaton aerospace ltd | Item Name: motor hydraulic |
| NSN: 1650-00-554-8102 (1650005548102) | CAGE Code: 62983 |
If you require part number 601003 from Eaton Aerospace Ltd which is described as a Motor Hydraulic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 601003 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 1650005548102 and was produced under the CAGE Code 62983. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 601003 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1650-00-554-8102 Item PartTypeName: MOTOR,HYDRAULIC | 1650 | 005548102 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 600717 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HANDRIGHT-HAND AND RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | 23.5 INCH-POUNDS |
| AAUH | SPLINE MINOR DIAMETER | 0.417 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.533 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | FLANGE |
| ABSA | SPLINE QUANTITY | 11 |
| ABSF | KEY WIDTH | 0.281 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.375-24 AND 0.563-180.563-18 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 8000.0 |
| AGJS | PITCH DIAMETER | 0.458 INCHES NOMINAL |
| AJAB | DRIVE SHAFT TYPE | SPLINED,INVOLUTE EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNFUNF AND UNF |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| APJC | THREAD LOCATION | INTERNALINTERNAL AND INTERNAL AND INTERNALINTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | 0.625 INCHES NOMINAL |
| ASAP | SPLINE PITCH | 24/48 |
| ASMM | CONNECTION QUANTITY | 31 AND 1 AND 11 |
| AWLS | CONNECTION TYPE | DRAIN |
| AWLS | CONNECTION TYPE | INLET |
| AWLS | CONNECTION TYPE | OUTLET |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT NO SPECIFIED TEMP RANGE |
| AXFC | CONNECTION DESIGN | THREADEDTHREADED AND THREADED AND THREADEDTHREADED |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXFH | SPLINE LENGTH | 0.500 INCHES NOMINAL |
| AXFM | DRIVE SHAFT GOVERNMENT STANDARD | AND10263 |
| AXFN | MOUNTING GOVERNMENT STANDARD | AND10260 |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 0.049 CUBIC INCHES |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | AND10050-3,AND10050-6 AND AND10050-6 |
| AZFG | MOUNTING BOLT HOLE SPACING | 1.875 IN. BY 1.875 IN. C TO C |
| FEAT | SPECIAL FEATURES | W/INTEGRAL SPEED CONTROL |
| MATT | MATERIAL | ALUMINUM ALLOY HOUSING |
| SFTT | SURFACE TREATMENT | ANODIZE HOUSING |
| ZZZV | FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM KC135 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions