Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 110-2076 | Alternate P/N : 1102076 | Manufacturer : enco mfg co |
| Item Name: lathe engine | NSN: 3416-01-390-4591 (3416013904591) | CAGE Code: 0GV04 |
| FSC: 3416 Lathes |
If you require part number 110-2076 from Enco Mfg Co which is described as a Lathe Engine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 110-2076 which is listed under the Federal Supply Class 3416 Lathes. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3416013904591 and was produced under the CAGE Code 0GV04. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 110-2076 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| BTSZ | SPINDLE SPEED QUANTITY | 18 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 60.0 TO 1550.0 |
| BTTD | RATED SWING | 12.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 12.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 7.500 INCHES NOMINAL |
| BTWB | THREAD CHANGE QUANTITY | 40 |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 5 MORSE |
| BTYN | HOLLOW SPINDLE HOLE SIZE | 1.500 INCHES NOMINAL |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| ACDC | CURRENT TYPE | AC |
| FAAZ | PHASE | SINGLE |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CABINET STAND; 1 6 IN. 3-JAW CHUCK; 1 8 IN. 4-CHUCK; 1 4-POSITION TOOLPOST; 2 CENTERS; 1 CHIP PAN; 1 SET OF CHANGE GEARS; 1 FACEPLATE; 1 STEADY REST; 1 FOLLOWREST; 1 TOOL KIT |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AWHA | BED TYPE | PERMANENT GAP |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| FEAT | SPECIAL FEATURES | ELECTRO-MAGNETIC STARTER SWITCH; D1-4 SPINDLE WITH 1 9/16 IN. BORE; REINFORCED CROSS RIBS; HARDENED AND GROUND BED; HEADSTOCK WITH TAPERED ROLLER BEARINGS; SWING IN GAP 17 IN.; CROSS SLIDE TRAVEL 5 1/2 IN.; COMPOUND REST TRAVEL 3 1/4 IN.; TAILSTOCK SPINDLE TRAVEL 3 3/4 IN.; TAILSTOCK TAPER 3 MORSE TAPER; 29 METRIC THREAD CHANGES 0.2MILLIMETERS TO 4.5 MILLIMETERS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAXX | MOUNTING TYPE | BENCH |
| APGF | DESIGN TYPE | SCREW |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| ADQR | CENTER TO CENTER DISTANCE | 36.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.500 INCHES NOMINAL |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | 4.0 TO 112.0 PER INCH |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions