Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : DTTS011 | Manufacturer : finish thompson inc | Item Name: pump unit rotary |
| NSN: 4320-01-388-1614 (4320013881614) | CAGE Code: 30255 |
If you require part number DTTS011 from Finish Thompson Inc which is described as a Pump Unit Rotary component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number DTTS011 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4320013881614 and was produced under the CAGE Code 30255. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part DTTS011 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYV | Maximum Discharge Flow Rate | 10.0 GALLONS PER MINUTE |
| ELEC | Voltage In Volts | 115 |
| MRC | Decoded Requirement | Clear Text Reply |
| ACDC | Current Type | AC |
| AHYZ | Operating Speed At Rated Capacity | 3450.0 REVOLUTIONS PER MINUTE |
| AAXS | Prime Mover Cooling Medium | AIR |
| AHZA | Pumping Element Operating Position | VERTICAL |
| FREQ | Frequency In Hertz | 60 |
| AHZR | Rotary Pump Design | SCREW |
| AKNA | Inclosure Type | FULLY INCLOSED |
| FAAZ | Phase | SINGLE |
| AAXH | Prime Mover Quantity | 1 |
| CSYL | Prime Mover Power Rating | 0.25 HORSEPOWER |
| AENK | Cooling Method | AIR TO AIR COOLED |
| ADZC | Environmental Protection | VAPORPROOF |
| AKDJ | Prime Mover Type | ELECTRIC MOTOR |
| AAYV | Discharge Connection Quantity | 1 |
| AENC | Pump Quantity | 1 |
| AAYW | Discharge Connection Type | UNTHREADED EXTERNAL |
| AMPS | Current Rating In Amps | 1.6 |
| FEAT | Special Features | PUMP LENGTH IS 27IN., 316 STAINLESS STEEL TUBE WITH 1.5IN. O/D; TEFC MOTOR; UP TO 10FT DISCHARGE HEAD; CAN HANDLE AGGRESSIVE LIQUIDS OR CORROSIVE ENVIRONMENTS; MOTOR HAS 12FT, 3-WIRE CORD AND PLUG, CSA APPROVED; LIQUIDS TO 400 CPS AND 1.8 S.G.; MAXIMUM TEMPERATURE IS 150DEG |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions