Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : FT-16C3XB-LEA-5 | Alternate P/N : FT16C3XBLEA5 | Manufacturer : fti flow technology inc |
| Item Name: meter flow rate indicating | NSN: 6680-01-624-2155 (6680016242155) | CAGE Code: 18316 |
| FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments |
If you require part number FT-16C3XB-LEA-5 from Fti Flow Technology Inc which is described as a Meter Flow Rate Indicating component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number FT-16C3XB-LEA-5 which is listed under the Federal Supply Class 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 6680016242155 and was produced under the CAGE Code 18316. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part FT-16C3XB-LEA-5 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | Special Features | CALIBRATION ACCURACY: +/- 0.05 PERCENT OF READING, TRACABLE TO NIST, REPEATBILITY: +/-0.05 PERCENT OF READING, LINEARITY: +/-0.10 PERCENT WITH LINEARIZING ELECTRONICS, RESPONSE TIME: 3-4MS TYPICAL, HOUSING MATERIAL: 315 STAINLESS STEEL, ROTOR MATERIAL: 430F STAINLESS STEEL, TEMPERATURE RANGE: -268 - 399 DEGREE C, DEPENDENT ON BEARING AND PICK-OFF, OPERATING PRESSURE: UP TO 2,068 BARG, DEPENDENT ON FITTING, BALL BEARING MATERIAL 440C STAINLESS STELL OR EQUIVALENT, CERAMIC, JOURNAL BEARING MATERIAL: CERAMIC, TUNGSTEN CARBIDE, GRAPHITE, PICK-OFF'S STRAIGHT RUN: MODULATED CARRER AND MAGNETIC 10D UPSTREAM AND 5D DOWNSTREAM MINIMUM, RECOMMENDED FILTRATION: BALL BEARINGS: 10 TO 100 MICRONS.END FITTING; 1", ID; 22MM, STANDARD RANGE: MIN LPM: 19 - 190, |
| MRC | Decoded Requirement | Clear Text Reply |
| BHBY | Dial Scale Marking Range | +19.0 TO 190.0 |
| CXCY | Part Name Assigned By Controlling Agency | TUBINE FLOWMETER FOR LIQUID APPLICATIONS (METRIC) |
| AWGJ | Tube Material | STEEL, FED STD 66, AISI 316/SAE 30316 |
| CPZR | Outlet Connection Position For Which Designed | VERTICAL |
| APGF | Design Type | CASE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions