Part No. : L43154G01 | Manufacturer : general electric company | Item Name: hinge assembly marine structural |
NSN: 2040-01-515-8306 (2040015158306) | CAGE Code: 07482 | FSC: 2040 Marine Hardware and Hull Items |
If you require part number L43154G01 from General Electric Company which is described as a Hinge Assembly Marine Structural component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number L43154G01 which is listed under the Federal Supply Class 2040 Marine Hardware and Hull Items. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2040015158306 and was produced under the CAGE Code 07482. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part L43154G01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. L43154G01
MRC | Criteria | Characteristic |
---|---|---|
AGAV | III END ITEM IDENTIFICATION | LM2500 BASE ENCLOSURE-LH |
MATL | MATERIAL | STEEL |
FEAT | SPECIAL FEATURES | MDCL ASTM-A36 OR AS3678-250 OR AS NOTED. MATERIAL SHALL CONFORM TO AMS 5643 WITH THE FOLLOWING EXCEPTIONS: 1) PRECIPATATION HEAT TREAT AT 1050 FAHRENEIT (+/-10 FAHRENHEIT) FOR 4 HOURS (+/-15 MINUTES); 2) PROPERTIES SHALL BE: TENSILE STRENGTH 150,000 PSI MIN YIELD, YIELD STRENGTH (.2% OFFSET) 133,000 PSI MIN, ELONGATION (IN 2 INCHES) 12% MIN, REDUCTION OF AREA 45% MIN, HARDNESS TO BE CHECKED ON 1 INCH FLAT PROVIDED ON THE SIDE OPPOSITE KEYWAY, THREE READINGS AT EACH END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload