| Part No. : J626P05F | Manufacturer : general electric company | Item Name: nut self locking extended washer |
| NSN: 5310-01-182-6271 (5310011826271) | CAGE Code: 07482 | FSC: 5310 Nuts and Washers |
If you require part number J626P05F from General Electric Company which is described as a Nut Self Locking Extended Washer component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number J626P05F which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310011826271 and was produced under the CAGE Code 07482. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part J626P05F today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-182-6271 Item PartTypeName: NUT,SELF-LOCKING,EXTENDED WASHER | 5310 | 011826271 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 72424-524 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| AAVX | WASHER OUTSIDE DIAMETER | 0.475 INCHES MINIMUM |
| ABKW | OVERALL HEIGHT | 0.460 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| ACTA | NUT STYLE | DOUBLE HEXAGON |
| ADEM | WASHER THICKNESS | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F118 ENGINE QUALIFIED |
| ASDB | WIDTH ACROSS FLATS | 0.375 INCHES NOMINAL |
| BZRR | THREAD SERIES | UNJF |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 48.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.3125 INCHES |
| FEAT | SPECIAL FEATURES | REMOVED TWO POINTS ON WRENCHING CONFIGURATION 180 DEGREES APART,10-POINT NUT FINISH IS ESNALUBE 382 |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735,A-286 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR AMS 5737,A-286 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload