Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 801674 | Manufacturer : general motors corp | Item Name: steering gear |
| NSN: 2530-00-737-5393 (2530007375393) | CAGE Code: 16764 | FSC: 2530 Vehicular Brake Steering Axle Wheel and Track Components |
If you require part number 801674 from General Motors Corp which is described as a Steering Gear component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 801674 which is listed under the Federal Supply Class 2530 Vehicular Brake Steering Axle Wheel and Track Components. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2530007375393 and was produced under the CAGE Code 16764. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 801674 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-737-5393 Item PartTypeName: ARM,STEERING GEAR | 2530 | 007375393 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 801674 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABGL | WIDTH | 0.625 INCHES NOMINAL |
| ABND | TAPER LENGTH | 0.563 INCHES NOMINAL |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 90.0 |
| AJLA | TEETH QUANTITY | 36 |
| APGF | DESIGN TYPE | OFFSET |
| AXND | COUNTERBORE FEATURE | NOT INCLUDED |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | 1.500 INCHES NOMINAL |
| CFBT | SECTOR SHAFT MOUNTING END SERRATED BORE | INCLUDED |
| CFBW | SMALL END MAJOR DIAMETER | 0.874 INCHES MINIMUM AND 0.876 INCHES MAXIMUM |
| CFBY | SMALL END TEETH DEPTH | 0.0375 INCHES NOMINAL |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | 5.000 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.875 INCHES NOMINAL |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | 0.750 INCHES NOMINAL |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEG,37 MIN |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |
| CTKF | TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions