Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : D616 | Manufacturer : general motors corp | Item Name: regulator engine generator |
| NSN: 2920-00-456-1447 (2920004561447) | CAGE Code: 16764 | FSC: 2920 Engine Electrical System Components Nonaircraft |
If you require part number D616 from General Motors Corp which is described as a Regulator Engine Generator component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number D616 which is listed under the Federal Supply Class 2920 Engine Electrical System Components Nonaircraft. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920004561447 and was produced under the CAGE Code 16764. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part D616 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-456-1447 Item PartTypeName: REGULATOR,ENGINE GENERATOR | 2920 | 004561447 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| D616 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARA | TERMINAL QUANTITY | 3 |
| AARB | TERMINAL TYPE | SCREW |
| ABTB | MOUNTING HOLE DIAMETER | 0.312 INCHES NOMINAL |
| ADER | MOUNTING STYLE | THREE HOLE TRIANGULAR |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | 1.562 INCHES NOMINAL |
| AGBC | SHOCK MOUNT | PROVIDED |
| ANYC | SYSTEM VOLTAGE RATING | 12.0 |
| ANYD | SYSTEM GROUND POLARITY | POSITIVE |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| APAK | CENTER TO CENTER DISTANCE BETWEEN HOLES ALONG WIDTH AND HOLE ALONG LENGTH | 5.125 INCHES NOMINAL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions