Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 82152 | Manufacturer : goodrich control systems gmbh | Item Name: nut plain hexagon |
| NSN: 5310-00-947-9859 (5310009479859) | CAGE Code: C0297 | FSC: 5310 Nuts and Washers |
If you require part number 82152 from Goodrich Control Systems Gmbh which is described as a Nut Plain Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 82152 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310009479859 and was produced under the CAGE Code C0297. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 82152 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-947-9859 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 009479859 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 82152 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | LEFT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.045 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.302 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNC |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.125 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM NUT AND 100.0 DEGREES MAXIMUM NUT |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
| CSXL | BEARING SURFACE FINISH | 250.0 MICROINCHES |
| MATT | MATERIAL | STEEL COMP 416F OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions