Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 796020-1 | Alternate P/N : 7960201 | Manufacturer : hamilton sundstrand corporation |
| Item Name: shaft shouldered | NSN: 3040-01-408-9984 (3040014089984) | CAGE Code: 73030 |
If you require part number 796020-1 from Hamilton Sundstrand Corporation which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 796020-1 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040014089984 and was produced under the CAGE Code 73030. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 796020-1 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-01-408-9984 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 014089984 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 796020-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT)" |
| AAHN | END SIMILARITY | NOT IDENTICAL" |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT)" |
| ABHP | OVERALL LENGTH | 1.785 INCHES NOMINAL" |
| AMDL | FIRST END DIAMETER | 0.4685 INCHES NOMINAL" |
| AMDM | FIRST END SPLINE LENGTH | 0.2100 INCHES NOMINAL" |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.4685 INCHES NOMINAL" |
| AMFZ | SECOND END DIAMETER | 0.4685 INCHES NOMINAL" |
| AMGA | SECOND END SPLINE LENGTH | 0.1900 INCHES NOMINAL" |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.4685 INCHES NOMINAL" |
| ATPC | STEP QUANTITY | 11" |
| BDSQ | FIRST END SPLINE QUANTITY | 12" |
| BDSR | SECOND END SPLINE QUANTITY | 12" |
| CSPY | LARGEST STEP DIAMETER | 0.690 INCHES NOMINAL" |
| FEAT | SPECIAL FEATURES | BOTH ENDS CUT ON 45 DEGREE ANGLE, THRU BORE 0.125 IN. DIA., USED ON EEC FUEL CONTROL, F117 ENGINE" |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT)" |
| AAHN | END SIMILARITY | NOT IDENTICAL" |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT)" |
| ABHP | OVERALL LENGTH | 1.785 INCHES NOMINAL" |
| AMDL | FIRST END DIAMETER | 0.4685 INCHES NOMINAL" |
| AMDM | FIRST END SPLINE LENGTH | 0.2100 INCHES NOMINAL" |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.4685 INCHES NOMINAL" |
| AMFZ | SECOND END DIAMETER | 0.4685 INCHES NOMINAL" |
| AMGA | SECOND END SPLINE LENGTH | 0.1900 INCHES NOMINAL" |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.4685 INCHES NOMINAL" |
| ATPC | STEP QUANTITY | 11" |
| BDSQ | FIRST END SPLINE QUANTITY | 12" |
| BDSR | SECOND END SPLINE QUANTITY | 12" |
| CSPY | LARGEST STEP DIAMETER | 0.690 INCHES NOMINAL" |
| FEAT | SPECIAL FEATURES | BOTH ENDS CUT ON 45 DEGREE ANGLE, THRU BORE 0.125 IN. DIA., USED ON EEC FUEL CONTROL, F117 ENGINE" |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions