Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 4005492 | Manufacturer : hersey measurement co | Item Name: pin grooved headed |
| NSN: 5315-01-050-1645 (5315010501645) | CAGE Code: 09550 | FSC: 5315 Nails Machine Keys and Pins |
If you require part number 4005492 from Hersey Measurement Co which is described as a Pin Grooved Headed component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 4005492 which is listed under the Federal Supply Class 5315 Nails Machine Keys and Pins. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5315010501645 and was produced under the CAGE Code 09550. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 4005492 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-050-1645 Item PartTypeName: PIN,GROOVED,HEADED | 5315 | 010501645 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 4005492 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | SQUARE |
| AASK | HEAD STYLE | BEVEL |
| ABMZ | DIAMETER | 0.744 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.571 INCHES MINIMUM AND 0.573 INCHES MAXIMUM |
| ABPB | UNDER HEAD LENGTH | 0.475 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| CRRG | PIN HEAD DIAMETER | 0.744 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 0.063 MICROINCHES OUTSIDE DIAMETER |
| CSYM | SURFACE FINISH | 0.063 MICROINCHES UNDERCUT |
| FEAT | SPECIAL FEATURES | 0.164-32 TAP THRU ONE HALF OR SHANK SHANK END 0.313 IN. MIN,0.314 IN. MAX DIA,HOLE 0.625 IN. DEEP IN SHANK END |
| HGTH | HEIGHT | 1.150 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions