Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 51B293-4 | Alternate P/N : 51B2934 | Manufacturer : huck international inc |
| Item Name: screw close tolerance | NSN: 5305-00-105-6881 (5305001056881) | CAGE Code: 97928 |
| FSC: 5305 Screws |
If you require part number 51B293-4 from Huck International Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 51B293-4 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305001056881 and was produced under the CAGE Code 97928. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 51B293-4 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-105-6881 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 001056881 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 51B293-4 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.219 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.375 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| FEAT | SPECIAL FEATURES | ALUMINUM GROMMET .012 IN. THK ON BEARING SURFACE OF HEAD |
| MATT | MATERIAL | STEEL COMP 430FSE OVERALL OR STEEL COMP 81B45 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 302B OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions