Part No. : T009-4-19 | Alternate P/N : T009419 | Manufacturer : huck international inc |
Item Name: screw close tolerance | NSN: 5305-01-353-1865 (5305013531865) | CAGE Code: 97928 |
FSC: 5305 Screws |
If you require part number T009-4-19 from Huck International Inc which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number T009-4-19 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013531865 and was produced under the CAGE Code 97928. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part T009-4-19 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. T009-4-19
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-353-1865 Item Description: Screw Close Tolerance | 5305 | 013531865 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
T009-4-19 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
AASB | FASTENER LENGTH | 1.597 INCHES MINIMUM AND 1.627 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
ANEE | GRIP LENGTH | 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
CSYM | SURFACE FINISH | 32.0 MICROINCHES OVERALL |
MATT | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
CMLP | THREAD QUANTITY PER INCH | 28 |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload