Part No. : BM17019-9-27 | Alternate P/N : BM17019927 | Manufacturer : huck international inc |
Item Name: bolt close tolerance | NSN: 5306-01-374-9233 (5306013749233) | CAGE Code: 17446 |
FSC: 5306 Bolts |
If you require part number BM17019-9-27 from Huck International Inc which is described as a Bolt Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number BM17019-9-27 which is listed under the Federal Supply Class 5306 Bolts. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5306013749233 and was produced under the CAGE Code 17446. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part BM17019-9-27 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. BM17019-9-27
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5306-01-374-9233 Item Description: Bolt Close Tolerance | 5306 | 013749233 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Bm17019-9-27 | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
CLOSE TOLERANCE | AASB | FASTENER LENGTH2 396 INCHES MINIMUM AND 2 443 INCHES MAXIMUM |
CLOSE TOLERANCE | AASK | HEAD STYLEDOUBLE HEXAGON |
CLOSE TOLERANCE | AATB | WIDTH BETWEEN FLATS0 877 INCHES MAXIMUM |
CLOSE TOLERANCE | ANEE | GRIP LENGTH1 677 INCHES MINIMUM AND 1 697 INCHES MAXIMUM |
CLOSE TOLERANCE | CMLP | THREAD QUANTITY PER INCH18 |
CLOSE TOLERANCE | MATT | MATERIALSTEEL COMP XM-13 OVERALL |
CLOSE TOLERANCE | SFTT | SURFACE TREATMENTPASSIVATE OVERALL |
CLOSE TOLERANCE | STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
CLOSE TOLERANCE | AASA | THREAD LENGTH0 725 INCHES NOMINAL |
CLOSE TOLERANCE | AAUR | GRIP DIAMETER0 5610 INCHES MINIMUM AND 0 5615 INCHES MAXIMUM |
CLOSE TOLERANCE | CQBC | MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH |
CLOSE TOLERANCE | THSD | THREAD SERIES DESIGNATORUNJF |
CLOSE TOLERANCE | AAJD | THREAD CLASS3A |
CLOSE TOLERANCE | AAJF | THREAD DIRECTIONRIGHT-HAND |
CLOSE TOLERANCE | AASU | HEAD HEIGHT0 318 INCHES MINIMUM AND 0 338 INCHES MAXIMUM |
CLOSE TOLERANCE | AHYM | NOMINAL THREAD DIAMETER0 562 INCHES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload