Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : M7HW24-24NI-24-PA45-59IN | Alternate P/N : M7HW2424NI24PA4559IN | Manufacturer : imperial electric company the |
| Item Name: hose assembly nonmetallic | NSN: 4720-01-092-5080 (4720010925080) | CAGE Code: 30327 |
| FSC: 4720 Hose and Tubing Flexible |
If you require part number M7HW24-24NI-24-PA45-59IN from Imperial Electric Company The which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number M7HW24-24NI-24-PA45-59IN which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720010925080 and was produced under the CAGE Code 30327. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part M7HW24-24NI-24-PA45-59IN today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-092-5080 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 010925080 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| F77C0617-24-24-24-59.00 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 2.080 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 20.000 INCHES |
| AEPR | FLANGE OUTSIDE DIAMETER | 2.375 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 1ST LAYER SPIRALLY LAID STEEL WIRE 1ST LAYER SPIRALLY LAID STEEL WIRE 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYE |
| CQGM | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 59.000 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions