Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 13456-9 | Alternate P/N : 134569 | Manufacturer : kaiser aerospace and electronics |
| Item Name: resistor variable wire wound non | NSN: 5905-00-914-0481 (5905009140481) | CAGE Code: 11189 |
| FSC: 5905 Resistors |
If you require part number 13456-9 from Kaiser Aerospace And Electronics which is described as a Resistor Variable Wire Wound Non component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 13456-9 which is listed under the Federal Supply Class 5905 Resistors. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5905009140481 and was produced under the CAGE Code 11189. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 13456-9 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-914-0481 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 009140481 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13456-9 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 2.480 INCHES NOMINAL |
| ABJT | TERMINAL LENGTH | 2.000 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.375 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.185 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.077 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.093 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.075 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.405 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.185 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.375 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACE GOLD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions