KDP328-12-066C by Kamatics Corporation With NSN 3120-01-333-9997

Part No. : KDP328-12-066C	Alternate P/N : KDP32812066C	Manufacturer : kamatics corporation
Item Name: bearing sleeve	NSN: 3120-01-333-9997 (3120013339997)	CAGE Code: 50632
FSC: 3120 Bearings Plain Unmounted

If you require part number KDP328-12-066C from Kamatics Corporation which is described as a Bearing Sleeve component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number KDP328-12-066C which is listed under the Federal Supply Class 3120 Bearings Plain Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3120013339997 and was produced under the CAGE Code 50632. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part KDP328-12-066C today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for KDP328-12-066C

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number KDP328-12-066C with NSN 3120-01-333-9997, 3120-01-333-9997

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-333-9997 Item PartTypeName: BEARING,SLEEVE	3120	013339997	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
KDP328-12-066C	5	1	5

Characteristics Data of NSN 3120-01-333-9997, 3120013339997

MRC	Criteria	Characteristic
ADAS	BODY INSIDE DIAMETER	0.7390 INCHES MINIMUM AND 0.7410 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM LEFT END SURFACE OF BODY AND FLANGE AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF FLANGE AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE
MATT	MATERIAL	STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF BODY AND CHROMATE OUTSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF LEFT FLANGE AND CHROMATE RIGHT END SURFACE OF LEFT FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
ZZZK	SPECIFICATION/STANDARD DATA	80632-04A061 MANUFACTURERS STANDARD
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY
ADAR	BODY OUTSIDE DIAMETER	0.9388 INCHES MINIMUM AND 0.9394 INCHES MAXIMUM
BZLX	CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
MATT	MATERIAL	STEEL COMP 630 LARGEST OUTSIDE DIAMETER
MATT	MATERIAL	STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF BODY AND CHROMATE RIGHT END SURFACE OF BODY
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END
ABHP	OVERALL LENGTH	0.7220 INCHES NOMINAL
AEPR	FLANGE OUTSIDE DIAMETER	1.1600 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE OUTSIDE RIGHT CORNER
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY
CQFM	HARDNESS RATING	28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF LEFT FLANGE AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC POLYAMIDE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE AND CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE