Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : ST4M164 | Manufacturer : kettenburg marine | Item Name: nut spacer plate |
| NSN: 5310-00-283-7550 (5310002837550) | CAGE Code: 75301 | FSC: 5310 Nuts and Washers |
If you require part number ST4M164 from Kettenburg Marine which is described as a Nut Spacer Plate component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ST4M164 which is listed under the Federal Supply Class 5310 Nuts and Washers. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310002837550 and was produced under the CAGE Code 75301. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ST4M164 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-283-7550 Item PartTypeName: NUT SPACER,PLATE | 5310 | 002837550 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST4M164 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| ACTA | NUT STYLE | PLATE NUT SPACER |
| ACVN | NUT LENGTH | 1.810 INCHES MINIMUM AND 1.840 INCHES MAXIMUM |
| ADAZ | THRU-HOLE DIAMETER | 0.437 INCHES NOMINAL |
| ADEB | PLATE THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| ADEC | PLATE WIDTH | 0.935 INCHES MINIMUM AND 0.965 INCHES MAXIMUM |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | 2 HOLES |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | 0.747 INCHES MINIMUM AND 0.753 INCHES MAXIMUM |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions