ERR400 by L3 Technologies Inc With NSN 3040-00-126-8225

Part No. : ERR400	Manufacturer : l3 technologies inc	Item Name: gearshaft helical
NSN: 3040-00-126-8225 (3040001268225)	CAGE Code: 02978

If you require part number ERR400 from L3 Technologies Inc which is described as a Gearshaft Helical component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number ERR400 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040001268225 and was produced under the CAGE Code 02978. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part ERR400 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for ERR400

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number ERR400 with NSN 3040-00-126-8225, 3040-00-126-8225

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-126-8225 Item PartTypeName: GEARSHAFT,HELICAL	3040	001268225	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
13206E0598	5	2	3

Characteristics Data of NSN 3040-00-126-8225, 3040001268225

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	4.516 INCHES NOMINAL
ABXF	SHAFT LENGTH	4.516 INCHES NOMINAL
AJLA	TEETH QUANTITY	12
AJWS	GEAR OUTSIDE DIAMETER	0.5860 INCHES NOMINAL
ANJS	SHAFT END TYPE	CROSS DRILLED UNTHREADED
AQGH	DIAMETRAL PITCH	24
AQPL	FACE WIDTH	0.812 INCHES NOMINAL
CRSJ	SHAFT TYPE	SHOULDERED
CWMW	TEETH TYPE	SINGLE HELIX
CWPP	PRESSURE ANGLE	20.0000 DEGREES
CWPZ	HELIX ANGLE	7.6916 DEGREES
CYEQ	SHAFT MATERIAL	COPPER ALLOY
CYER	GEAR MATERIAL	COPPER ALLOY
CYET	SHAFT LARGEST DIAMETER	0.632 INCHES NOMINAL
CYEU	GEAR LOCATION ON SHAFT	OFF CENTER BETWEEN ENDS OF SHAFT
CYEV	LONGER SHAFT SEGMENT LENGTH	2.892 INCHES NOMINAL
CYEW	SHAFT END SIZE	0.281 INCHES AND 0.308 INCHES