Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 3M1169C4-6A | Alternate P/N : 3M1169C46A | Manufacturer : linread canada ltd |
| Item Name: screw close tolerance | NSN: 5305-01-478-2887 (5305014782887) | CAGE Code: U6683 |
| FSC: 5305 Screws |
If you require part number 3M1169C4-6A from Linread Canada Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 3M1169C4-6A which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305014782887 and was produced under the CAGE Code U6683. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 3M1169C4-6A today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-478-2887 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014782887 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1169C4-6A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.415 INCHES MINIMUM AND 0.435 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.497 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.219 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, HORNET F/A-18 |
| AASB | FASTENER LENGTH | 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASU | HEAD HEIGHT | 0.110 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CQBC | MINIMUM TENSILE STRENGTH | 240 POUNDS PER SQUARE INCH |
| AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INCONEL718 MFR REF 1ST MATERIAL RESPONSE OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions