Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 760200 | Manufacturer : lockheed martin corporation | Item Name: shaft shouldered |
| NSN: 3040-00-339-7705 (3040003397705) | CAGE Code: 98897 | FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 760200 from Lockheed Martin Corporation which is described as a Shaft Shouldered component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 760200 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040003397705 and was produced under the CAGE Code 98897. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 760200 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-339-7705 Item PartTypeName: SHAFT,SHOULDERED | 3040 | 003397705 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 760200 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | PLAIN |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 3.090 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | ACFT MODEL F104 |
| AMDL | FIRST END DIAMETER | 0.7483 INCHES MINIMUM AND 0.7493 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.4984 INCHES MINIMUM AND 0.4994 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 6 |
| CSPY | LARGEST STEP DIAMETER | 0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 160.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | ACHAMFER 45 DEG. X 0.03 IN. EACH END DS362-10 SERRATION BETWEEN SECOND AND FIFTH STEPS 0.330 IN. DIA HOLE THROUGH LENGTH OF SHAFT ON CENTERLINE CHAMFER 30 DEG X 0.56 IN.,THIRD AND FIFTH STEPS |
| MATT | MATERIAL | STEEL COMP 8630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions