Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : L310009690 | Manufacturer : lockheed martin librascope | Item Name: gear spur |
| NSN: 3020-00-834-0750 (3020008340750) | CAGE Code: 36090 | FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number L310009690 from Lockheed Martin Librascope which is described as a Gear Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number L310009690 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020008340750 and was produced under the CAGE Code 36090. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part L310009690 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-834-0750 Item PartTypeName: GEAR,SPUR | 3020 | 008340750 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1366883-70 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN,SOLID |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AJLA | TEETH QUANTITY | 70 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.747 INCHES |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWRM | FACE NOMINAL WIDTH | 0.094 INCHES |
| CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | 0.187 INCHES FIRST END |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| AGJS | PITCH DIAMETER | 0.7282 INCHES MINIMUM AND 0.7292 INCHES MAXIMUM |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.218 INCHES FIRST END |
| CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 0.187 INCHES FIRST END |
| SFTT | SURFACE TREATMENT | ANODIZE BODY |
| SFTT | SURFACE TREATMENT | ANODIZE HUB |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions