Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : B5100 | Manufacturer : lockwood corp | Item Name: lock set mortise |
| NSN: 5340-00-964-3948 (5340009643948) | CAGE Code: 01096 | FSC: 5340 Hardware Commercial |
If you require part number B5100 from Lockwood Corp which is described as a Lock Set Mortise component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number B5100 which is listed under the Federal Supply Class 5340 Hardware Commercial. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5340009643948 and was produced under the CAGE Code 01096. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part B5100 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABGL | Width | 1.250 INCHES NOMINAL |
| ASBH | Face Shape | BEVELED |
| APHE | Operation Method | KEY WHEN STOP IS SET LATCH BOLT AND INSIDE TURN KNOB LATCH BOLT |
| ABNM | Thickness | 1.375 INCHES NOMINAL OVERALL |
| ABNM | Thickness | 2.750 INCHES NOMINAL BACKSET |
| SFTT | Surface Treatment | ENAMEL BAKED CASE |
| ABNM | Thickness | 4.000 INCHES NOMINAL CASE |
| CBBL | Features Provided | KNOB HANDLE AND KEY PLATE AND SPINDLE AND STRIKE AND ROSE AND TURN KNOB AND SCREW |
| MRC | Decoded Requirement | Clear Text Reply |
| SFTT | Surface Treatment | COPPER ALLOY KNOB |
| MATT | Material | IRON CASE |
| MATT | Material | COPPER ALLOY KNOB |
| ABRY | Length | 8.000 INCHES NOMINAL |
| HGTH | Height | 6.000 INCHES NOMINAL |
| SHPE | Shape | RECTANGULAR CASE |
| APGF | Design Type | LATCH BOLT |
| CHMF | Knob Shape | ROUND |
| ASSK | Knob Quantity | 2 |
| BTJY | Bolt Type | REVERSE BEVEL |
| FEAT | Special Features | IWHEN DOOR IS CLOSED AUXILIARY BOLT DEAD LOCKS LATCH BOLT AGAINST END PRESSURE;CASE THICKNESS:0.875 IN THK;OUTSIDE SPACING,KNOB HUB CENTER TO CYLINDER CENTER:4.000;OPERATING METHOD:KNOB WHEN STOP IS SET |
| CHLZ | Locking Mechanism Type | PIN TUMBLER |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions