Part No. : 387-3530-3 | Alternate P/N : 38735303 | Manufacturer : marino enterprises inc |
Item Name: gear spur | NSN: 3020-01-313-6838 (3020013136838) | CAGE Code: 1MF53 |
FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number 387-3530-3 from Marino Enterprises Inc which is described as a Gear Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 387-3530-3 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020013136838 and was produced under the CAGE Code 1MF53. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 387-3530-3 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 387-3530-3
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3020-01-313-6838 Item Description: Gear Spur | 3020 | 013136838 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
387-3530-3 | 1 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAQL | BODY STYLE | PLAIN, SOLID |
ABSA | SPLINE QUANTITY | 27 BOTH ENDS |
AGAV | END ITEM IDENTIFICATION | 1005011827599 |
AGJS | PITCH DIAMETER | 27.0 MILLIMETERS NOMINAL |
AJLA | TEETH QUANTITY | 18 |
ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
BDTX | SPLINE PITCH DIAMETER | 14.2 MILLIMETERS NOMINAL BOTH ENDS |
CWCD | NOMINAL OUTSIDE DIAMETER | 30.0 MILLIMETERS |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
CWRM | FACE NOMINAL WIDTH | 14.9 MILLIMETERS |
CWRS | BORE NOMINAL DIAMETER | 13.9 MILLIMETERS BOTH ENDS |
MATT | III MATERIAL | STEEL COMP 4130 OVERALL |
STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 6.4 MILLIMETERS BOTH ENDS |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload