Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : MS21432-5TEE8G | Alternate P/N : MS214325TEE8G | Manufacturer : military standards corp |
| Item Name: cam follower needle bearing | NSN: 3110-01-122-1330 (3110011221330) | CAGE Code: 96906 |
| FSC: 3110 Bearings Antifriction Unmounted |
If you require part number MS21432-5TEE8G from Military Standards Corp which is described as a Cam Follower Needle Bearing component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number MS21432-5TEE8G which is listed under the Federal Supply Class 3110 Bearings Antifriction Unmounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3110011221330 and was produced under the CAGE Code 96906. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part MS21432-5TEE8G today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-122-1330 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING | 3110 | 011221330 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21432-5TEE8G | 5 | 2 | 2 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.3590 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.2030 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7495 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM |
| AGRJ | STUD DIAMETER | 0.3105 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM |
| AGXF | STUD LENGTH | 0.8590 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.3125 INCHES |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC ACETAL OR PLASTIC POLYAMIDE SEAL |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 END PLATE |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 OUTER RACE |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 ROLLER |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP E50100 OR STEEL COMP E51100 STUD |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES AS MOUNTED |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTER RING |
| SFTT | SURFACE TREATMENT | CHROMIUM ROLLER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROLLER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | CAM FOLLOWER |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions