DWG 130941 P N 114678 by Nacco Materials Handling Group Inc With NSN 4720-01-433-1310

Part No. : DWG 130941 P N 114678	Alternate P/N : DWG130941PN114678	Manufacturer : nacco materials handling group inc
Item Name: hose assembly nonmetallic	NSN: 4720-01-433-1310 (4720014331310)	CAGE Code: 30076
FSC: 4720 Hose and Tubing Flexible

If you require part number DWG 130941 P N 114678 from Nacco Materials Handling Group Inc which is described as a Hose Assembly Nonmetallic component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number DWG 130941 P N 114678 which is listed under the Federal Supply Class 4720 Hose and Tubing Flexible. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 4720014331310 and was produced under the CAGE Code 30076. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part DWG 130941 P N 114678 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.

Please Fill Out Below Form for DWG 130941 P N 114678

Required fields compulsory *

Contact Information

Note : We will not share your information to any third parties.

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms & Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

NSN Information for Part Number DWG 130941 P N 114678 with NSN 4720-01-433-1310, 4720-01-433-1310

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-433-1310 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	014331310	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
130941	2	9	D

Characteristics Data of NSN 4720-01-433-1310, 4720014331310

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3A 2ND END"
AAJD	THREAD CLASS	3B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.312 INCHES NOMINAL"
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.690 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	4.500 INCHES"
AGAV	END ITEM IDENTIFICATION	SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE)"
AHNC	CONNECTION STYLE	PLAIN 2ND END"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 2ND END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL TUBE 2ND END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CQBD	BURST TEST PRESSURE	10000.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC"
CQGM	MAXIMUM OPERATING PRESSURE	3250.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.562 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.562 INCHES 2ND END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	6500.0 POUNDS PER SQUARE INCH"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	32.000 INCHES NOMINAL OVERALL"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UNF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNF 2ND END"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3A 2ND END"
AAJD	THREAD CLASS	3B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.312 INCHES NOMINAL"
ABJH	TEMP RATING	-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.690 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	4.500 INCHES"
AGAV	END ITEM IDENTIFICATION	SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE)"
AHNC	CONNECTION STYLE	PLAIN 2ND END"
AHNC	CONNECTION STYLE	SWIVEL NUT FLARE 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 2ND END"
AWLS	CONNECTION TYPE	THREADED EXTERNAL TUBE 2ND END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CQBD	BURST TEST PRESSURE	10000.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED WIRE AND OUTER LAYER WRAPPED RUBBER, SYNTHETIC"
CQGM	MAXIMUM OPERATING PRESSURE	3250.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.562 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.562 INCHES 2ND END"
CQRB	SEAT ANGLE	37.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	6500.0 POUNDS PER SQUARE INCH"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	32.000 INCHES NOMINAL OVERALL"
MEDA	MEDIA FOR WHICH DESIGNED	FUEL/OIL, HYDROCARBON SINGLE RESPONSE"
THSD	THREAD SERIES DESIGNATOR	UNF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNF 2ND END"

Related NSN Componets for DWG 130941 P N 114678

DWG-002 AY 1KW08PN3-VNB31-LH-B8	DWG-00471000-05	DWG-00862152	DWG-01016640
DWG.0150.04190	DWG 03-4239B SHEET 22	DWG 0403-3-439-001 FIND NO.14	DWG-0N823320
DWG-0N823320	DWG-0N823350 REVISION E	DWG 1.5-862SSBC-304L ITEM 4	DWG 10-55002B REV E ITEM 200
DWG 10042949	DWG.100972 PIECE 16	DWG 1030-040L	DWG 1117-00-DA FIND NO. 5A
DWG 1117-00-DA FIND NO. 5A	DWG-1117-00-DA-FIND-NO-5A	DWG-1117-00-DA-FIND-NO-5A	DWG-1117-00-DA-FIND-NO-9
DWG 112559001 REV C ITEM 8	DWG 11621 REV B IDENT NUMBER-4	DWG 1240662 ITEM 19 1	DWG 129348 P N 161060
DWG 129348 P N 197345	DWG 131092 REV E F N 11	DWG 131092 REV E F N 12	DWG 131092 REV E F N 15
DWG 131092 REV E F N 16	DWG 131092 REV E F N 19	DWG 131092 REV E F N 20	DWG 131092 REV E F N 21
DWG 131092 REV E F N 22	DWG 131092 REV E F N 24	DWG 131092 REV E F N 27	DWG 131092 REV E F N 28

We are proud to supply every branch of the United States military

Top NSN Parts

view all

Leading NSN Parts Manufacturer