Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NAS514P632-6 | Alternate P/N : NAS514P6326 | Manufacturer : national aerospace standards com |
| Item Name: screw machine | NSN: 5305-00-550-1519 (5305005501519) | CAGE Code: 80205 |
| FSC: 5305 Screws |
If you require part number NAS514P632-6 from National Aerospace Standards Com which is described as a Screw Machine component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS514P632-6 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305005501519 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS514P632-6 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-00-550-1519 Item PartTypeName: SCREW,MACHINE | 5305 | 005501519 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 947546-2106 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.375 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.233 INCHES MINIMUM AND 0.279 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,MACHINE,100 DEG. FLAT HEAD,FULL THREADED,ALLOY STEEL |
| CYAU | SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions