Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NAS1580A5T10 | Manufacturer : national aerospace standards com | Item Name: screw close tolerance |
| NSN: 5305-01-521-4655 (5305015214655) | CAGE Code: 80205 |
If you require part number NAS1580A5T10 from National Aerospace Standards Com which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1580A5T10 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305015214655 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1580A5T10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-521-4655 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015214655 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5305PL0561040 | 5 | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHYM | Nominal Thread Diameter | 0.312 INCHES |
| AASK | Head Style | FLAT COUNTERSUNK |
| ANEE | Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| SFTT | Surface Treatment | CADMIUM OVERALL |
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| MRC | Decoded Requirement | Clear Text Reply |
| ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| AASB | Fastener Length | 1.111 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.476 INCHES MINIMUM AND 0.526 INCHES MAXIMUM |
| ZZZK | Specification/Standard Data | 80205 - NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AASL | Head Diameter | 0.578 INCHES MINIMUM AND 0.633 INCHES MAXIMUM |
| STDC | Surface Treatment Document And Classification | QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRSQ | Countersink Angle | 100.0 DEGREES NOMINAL |
| THSD | Thread Series Designator | UNJF |
| CMLP | Thread Quantity Per Inch | 24 |
| AAUR | Grip Diameter | 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| MATT | Material | STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MDCL | Material Document And Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS6415 ASSN STD 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions