Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : NAS509-8C | Alternate P/N : NAS5098C | Manufacturer : national aerospace standards com |
| Item Name: nut plain hexagon | NSN: 5310-01-057-6724 (5310010576724) | CAGE Code: 80205 |
If you require part number NAS509-8C from National Aerospace Standards Com which is described as a Nut Plain Hexagon component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS509-8C which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5310010576724 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS509-8C today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-057-6724 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 010576724 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| NAS509-8C | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.313 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | MULTIPLE LAUNCH ROCKET SYSTEM MLRS) |
| AGGP | DRILLED HOLE DIAMETER | 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNJF |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 109.0 DEGREES MINIMUM AND 111.0 DEGREES MAXIMUM BOTH ENDS |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| CSXL | BEARING SURFACE FINISH | 125.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | 150000 PSI MIN TENSILE STRENGTH |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ZZZK | SPECIFICATION/STANDARD DATA | 80205-NAS509 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions