Part No. : NAS1581C3T11P | Manufacturer : national aerospace standards | Item Name: screw close tolerance |
NSN: 5305-01-622-6890 (5305016226890) | CAGE Code: 80205 | FSC: 5305 Screws |
If you require part number NAS1581C3T11P from National Aerospace Standards which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number NAS1581C3T11P which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305016226890 and was produced under the CAGE Code 80205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part NAS1581C3T11P today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. NAS1581C3T11P
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-622-6890 Item Description: Screw Close Tolerance | 5305 | 016226890 | 0 | N | A | |
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | A | 0 | |||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Nas1581c3t11p | 5 | 1 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AASK | Head Style | FLAT COUNTERSUNK |
CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
CMLP | Thread Quantity Per Inch | 32 |
SFTT | Surface Treatment | CADMIUM OVERALL |
AASL | Head Diameter | 0.257 INCHES MINIMUM AND 0.304 INCHES MAXIMUM |
AASA | Thread Length | 0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM |
CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
ABQZ | Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
AASB | Fastener Length | 1.036 INCHES MINIMUM AND 1.066 INCHES MAXIMUM |
AAJF | Thread Direction | RIGHT-HAND |
ANEE | Grip Length | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
AGAV | End Item Identification | A-10 WRP |
MRC | Decoded Requirement | Clear Text Reply |
AHYM | Nominal Thread Diameter | 0.190 INCHES |
CXCY | Part Name Assigned By Controlling Agency | BOLT REDUCED HEAD |
THSD | Thread Series Designator | UNJF |
MATT | Material | IRON ALLOY 660 OVERALL |
AAUR | Grip Diameter | 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
AAJD | Thread Class | 3A |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload