Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 1128CSM46503-13 | Alternate P/N : 1128CSM4650313 | Manufacturer : northrop grumman systems corporation |
| Item Name: screw close tolerance | NSN: 5305-01-350-4548 (5305013504548) | CAGE Code: 79RG9 |
If you require part number 1128CSM46503-13 from Northrop Grumman Systems Corporation which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 1128CSM46503-13 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013504548 and was produced under the CAGE Code 79RG9. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 1128CSM46503-13 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-350-4548 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013504548 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1128CSM46503-13 | 5 | 1 | C | 9 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.075 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| AASA | THREAD LENGTH | 0.819 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.194 INCHES MINIMUM AND 1.225 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.752 INCHES MINIMUM AND 0.762 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 37.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8740 OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD | THREAD CLASS | 3A |
| ANEE | GRIP LENGTH | 0.375 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 165000 POUNDS PER SQUARE INCH |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.124 INCHES MINIMUM FIRST HOLE AND 1.155 INCHES MAXIMUM FIRST HOLE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions