Part No. : 571740-08H10 | Alternate P/N : 57174008H10 | Manufacturer : ontic engineering and mfg inc |
Item Name: screw cap socket head | NSN: 5305-00-562-6475 (5305005626475) | CAGE Code: 45934 |
FSC: 5305 Screws |
If you require part number 571740-08H10 from Ontic Engineering And Mfg Inc which is described as a Screw Cap Socket Head component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 571740-08H10 which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305005626475 and was produced under the CAGE Code 45934. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 571740-08H10 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 571740-08H10
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-00-562-6475 Item Description: Screw Cap Socket Head | 5305 | 005626475 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
571740-08h10 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.625 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.625 INCHES NOMINAL |
AASK | HEAD STYLE | FLAT CHAMFER |
AASL | HEAD DIAMETER | 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
AASU | HEAD HEIGHT | 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
AAUB | HOLE DIAMETER | 0.046 INCHES NOMINAL |
ABQZ | INTERNAL DRIVE STYLE | HEXAGON |
AHYM | NOMINAL THREAD DIAMETER | 0.164 INCHES |
ASDB | WIDTH ACROSS FLATS | 0.140 INCHES MINIMUM AND 0.142 INCHES MAXIMUM |
ASXK | HOLE QUANTITY | 6 |
BQDM | HOLE TYPE | DRILLED |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
CQFM | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
CRHC | HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
MATT | MATERIAL | STEEL COMP 410 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
THSD | THREAD SERIES DESIGNATOR | UNC |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload