Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : XA3458C4 | Manufacturer : prestolite electric inc | Item Name: generator engine accessory |
| NSN: 2920-00-782-4156 (2920007824156) | CAGE Code: 35510 |
If you require part number XA3458C4 from Prestolite Electric Inc which is described as a Generator Engine Accessory component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number XA3458C4 which is listed under the Federal Supply Class . To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 2920007824156 and was produced under the CAGE Code 35510. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part XA3458C4 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-782-4156 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 007824156 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| XA3458C4 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABRR | KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.750 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.430 INCHES MINIMUM AND 4.440 INCHES MAXIMUM |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.430 INCHES MINIMUM AND 4.440 INCHES MAXIMUM |
| CFHL | THREAD CLASS | 2A |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.750 INCHES NOMINAL |
| ABPT | SECOND STEP DIAMETER | 0.7794 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| ABVA | UNTHREADED PORTION LENGTH | 1.220 INCHES MINIMUM AND 1.245 INCHES MAXIMUM |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.405 INCHES NOMINAL |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 5000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 80.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1500 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 0.00.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.631 INCHES MINIMUM AND 6.644 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.131 INCHES MINIMUM AND 8.144 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.627 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 50000 |
| BZRR | THREAD SERIES | UNF |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.625 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 16 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions