Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : 113472 | Manufacturer : reliance electric industrial co | Item Name: pulley timing belt |
| NSN: 3020-01-193-4335 (3020011934335) | CAGE Code: 71956 | FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number 113472 from Reliance Electric Industrial Co which is described as a Pulley Timing Belt component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 113472 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020011934335 and was produced under the CAGE Code 71956. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 113472 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-193-4335 Item PartTypeName: PULLEY,TIMING BELT | 3020 | 011934335 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13226E1798 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | GMATERIAL GREY IRON,FINISH CHROMIUM PLATE OR PHOSPHATE COAT DYED NON-REFLECTIVE BLACK BORE TAPPERED 4 DEGREES INCLUDES TWO 0.375-16 UNC 2B HOLES ON 2.125 BC AND ONE 0.391 X 0.625 IN. DEEP HOLE ON 2.125 BC O/A OD 4.060 IN. |
| MATT | MATERIAL | IRON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A48,CLASS 30 ASSN STD SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-14538 MIL SPEC 1ST TREATMENT RESPONSE OR DOD-P-16232,TYPE M,CLASS IV MIL SPEC 2ND TREATMENT RESPONSE |
| ABHP | OVERALL LENGTH | 1.000 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 2.250 INCHES MAXIMUM |
| ALPN | FACE TYPE | FLAT GROOVED WITH DOUBLE FLANGE |
| AQPL | FACE WIDTH | 0.750 INCHES NOMINAL |
| ASBM | HUB DIAMETER | 3.060 INCHES NOMINAL |
| ASBP | BORE TYPE | TAPERED |
| CYDR | FACE GROOVE/TOOTH QUANTITY | 32 |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions