Call: +1-714-705-4780 | sales@asap-logisticsolutions.com
| Part No. : G5-20 | Alternate P/N : G520 | Manufacturer : roller bearing company of america |
| Item Name: gear spur | NSN: 3020-01-107-2619 (3020011072619) | CAGE Code: 00141 |
| FSC: 3020 Gear Pulley Sprocket and Transmission Chain |
If you require part number G5-20 from Roller Bearing Company Of America which is described as a Gear Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number G5-20 which is listed under the Federal Supply Class 3020 Gear Pulley Sprocket and Transmission Chain. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3020011072619 and was produced under the CAGE Code 00141. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part G5-20 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-107-2619 Item PartTypeName: GEAR,SPUR | 3020 | 011072619 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G5-20 | 2 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AJLA | TEETH QUANTITY | 20 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 0.457 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.219 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.187 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.187 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PINNED FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
| AAQL | BODY STYLE | PLAIN,SOLID |
| AGJS | PITCH DIAMETER | 0.4156 INCHES MINIMUM AND 0.4166 INCHES MAXIMUM |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload
Over 75000 manufacturers all over the world
Guaranteed on-time delivery
Complete purchasing solutions