Part No. : JTE60248 | Manufacturer : rotating precision mechanisms inc | Item Name: bearing unit ball |
NSN: 3130-01-600-0428 (3130016000428) | CAGE Code: 54547 | FSC: 3130 Bearings Mounted |
If you require part number JTE60248 from Rotating Precision Mechanisms Inc which is described as a Bearing Unit Ball component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number JTE60248 which is listed under the Federal Supply Class 3130 Bearings Mounted. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3130016000428 and was produced under the CAGE Code 54547. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part JTE60248 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. JTE60248
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3130-01-600-0428 Item Description: Bearing Unit Ball | 3130 | 016000428 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Jte60248 | 5 | 9 | D |
MRC | Criteria | Characteristic |
---|---|---|
AGKL | Lubrication Fitting Type | FLUSH |
SFTT | Surface Treatment | CHROMIUM RACE |
MATT | Material | RUBBER SYNTHETIC SEAL |
MATT | Material | STEEL COMP E52100 BALL |
AGAV | End Item Identification | ELECTRONIC WARFARE EQUIPMENT, NONAIRBORNE |
MDCL | Material Document And Classification | AVON SPEC NUMBER BES 2-1-054, AISI 1552 MFR REF SINGLE MATERIAL RESPONSE RACE |
LMDC | Lubrication Material Document And Classification | MIL-C-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
CXCY | Part Name Assigned By Controlling Agency | BEARING ASSY |
MDCL | Material Document And Classification | AISI S2100 ASSN STD SINGLE MATERIAL RESPONSE BALL |
LBMA | Lubrication Material | GREASE |
FEAT | Special Features | OUTSIDE DIA 26.125; CONTAINS 64 (.75 DIA) BALLS; TWO 1/8-27 NPT GREASE FITTINGS ARE LOCATED 180 DEG APART (RECEASED BELOW OD) TO INTERSECT WITH THE VERTICAL 1/8-27 NPT LUBE HOLES; HARDNESS RATING OF RACES 24-32 RC, BALLS 63-66RC, RACEWAY INDUCTION 58-63RC; HAS INV STUB TOOTH FORM, PITCH DIA 19, DIAMETRAL PITCH 8, PRESSURE ANAGLE 20 DEG, 152 TEETH, HARDNESS 24-32RC, CIRCULAR TOOTH THICKNESS 0.1963-0.1948; EACH RACE IS 2.0 INC HIGH, THEY DON'T ALIGN LEVEL, ENTIRE ASSEMBLY IS 2.50 HIGH |
MATT | Material | STEEL RACE |
CWGR | Lubrication Fitting Angle From Horizontal Centerline | 0.0 DEGREES NOMINAL |
ABXV | Bore Diameter | 18.850 INCHES MINIMUM AND 18.856 INCHES MAXIMUM |
MRC | Decoded Requirement | Clear Text Reply |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload