Part No. : 63416-01 | Alternate P/N : 6341601 | Manufacturer : safran power usa llc |
Item Name: detent switch | NSN: 5930-00-033-4501 (5930000334501) | CAGE Code: 3CPE0 |
FSC: 5930 Switches |
If you require part number 63416-01 from Safran Power Usa Llc which is described as a Detent Switch component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 63416-01 which is listed under the Federal Supply Class 5930 Switches. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5930000334501 and was produced under the CAGE Code 3CPE0. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 63416-01 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 63416-01
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5930-00-033-4501 Item Description: Detent Switch | 5930 | 000334501 | 0 | P | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
63416-01 | 6 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 1.156 INCHES NOMINAL |
ABKW | OVERALL HEIGHT | 1.875 INCHES NOMINAL |
ABMK | OVERALL WIDTH | 1.656 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 0.312 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
ADJH | MOUNTING METHOD | FLANGE |
AFTM | SWITCH POSITION QUANTITY | 12 |
AKJK | SHAFT CROSS HOLE DIAMETER | 0.188 INCHES NOMINAL |
ALGC | MOUNTING CONFIGURATION | MOUNTS BY TWO 1/8 IN. DIA HOLES SPACED 1-9/16 IN. C TO C |
AMDA | LOCKING DEVICE | NOT INCLUDED |
APDM | POSITIONING INCREMENTS IN DEG | 30.0 |
APDN | STOP ADJUSTABILITY | NONADJUSTABLE |
APDQ | SHAFT CROSS-SECTIONAL SHAPE AND LOCATION | ROUND PARALLEL FLATTED FRONT END |
APDR | NOMINAL SIZE | 0.250 IN. DIA FRONT END |
APDS | DISTANCE FROM SHAFT END TO MOUNTING SURFACE | 0.438 INCHES |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload